Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
75 results found
-
DynDNS-Service Module
Add a new Domain/Subdomain-Type "DynDNS", which redirects to a dynamic IP-Address like dyndns.org and similar sites including an api to sync the current ip address through url call.
456 votesThank you for your input. We will definitely look into integrating DynDNS in our future releases
-
powerdns support
It'd be awesome if we can get support for powerdns support instead of bind9.
205 votesEveryone, please continue voting for this feature if you consider it important.
— rk
-
RDNS Setup For Domains
Please Do allow to create RDNS(reverse DNS) records to the users for their mailing severs.
Many other Service providers have easy setup for that like: http://www.rackspace.com/knowledge_center/article/rackspace-cloud-essentials-creating-a-reverse-dns-record
Thanks
101 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
— AY
Additional information regarding this request:
Please be sure you are an owner of IP-address if you plan to vote this suggestion.
An owner of a block of IP-addresses has ability configure PTR records for IP-addresses in the block. If you rent a server or create a virtual machine in a cloud, you are not an owner of IP-address.
Usually, companies like ISP or Cloud Providers own blocks of IP-addresses. In this case, you need to use Hosting/Cloud Provider Control Panel and set up reverse zone for an IP-address (not in Plesk Panel).
-
Plesk DNS Clustering
Please give to Plesk the ability to do DNS Clustering (at least) with another servers like cPanel; is not really difficult to configure manually a BIND DNS clustering
63 votes -
abilty to add ALIAS or ANAME DNS records in Plesk
Add abilty to create ALIAS or ANAME DNS in Plesk. To point the "naked" version of your domain (like example.com ), because this is not posible with the CNAME ( RFC1912 section 2.4:)
47 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
An extension to synchronize DNS zones from Plesk to Vultr DNS service.
This is something that really should be available by now, especially as it's available for DO and AWS.
28 votes -
Allow DKIM/DMARC/SPF records for the server's hostname domain
This thing that Plesk does not present DKIM public key, referred to server's hostname, is quite annoying. cPanel does, for example.
And I'm not going to mess things up with changing hostname, so to match it with a newly created domain (whose purpose would be just having a DKIM in place).27 votesThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
DNS: Add PTR record without domain subscription
Sometimes PTR records have different names from domains subscription, for example to IP address rented to customers.
As ISP provider you manage PTR records and you need identify reverses records with services or customers.
27 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
—
ET -
Set up MX records for G Suite Gmail in one click
Would be nice to get some extension for plesk users so they can switch mx from default to G Suite Gmail in "one click".
Similar to Remote MX Wizard for cPanel
https://www.gk-root.com/GK-Apps/Remote-MX-Wizard/25 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Multi-master DNS scheme
The ability to configure several master servers for ***** server with the corresponding checks (for example, check if a domain already exists on one of master server than block creation of domain on another master server)
25 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
— AY
-
Add the ability to automate DNSSEC zone signing for multiple domains
Now it is possible to sign zones manually only.
Moreover, it is required to copy DS records to the parent zone manually even if the parent domain is hosted in Plesk.24 votesThank you for your input! We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
—
IG -
Support underscore creation in domain for NS records
Support underscore for DNS record creation, e.g.,
add NS records for default._domainkey.example.com
19 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Make it possible to setup a Microsoft DNS Server as Master, and another Microsoft DNS Server one as *****, that replicate/synchronise.
I have the need to have an backup DNS Server, and especially using Microsoft DNS on both servers.
This because we have scripts that have to be ran on Microsoft DNS Servers, to generate Let's Encrypt certificates for non-web purposes.And syncing the DNS on both MS DNS servers will give us near no downtime in DNS when its replicated.
18 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
—
IG -
Use FQDN in Zone Transfer!
MY Zonetransfer failed since months without noticing it.
As my *****-dns provider changed the IP address for the AXFR-Servers.
If Plesk would accept a FQDN, this wouldn't have happened.
13 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
— AY
-
Add "Are you sure?" question for disabling DNS zone management.
It happend allready twice to me that i accedently disabled a dns zone because i misclicked the button. Every time it takes about 3+ hours until all dns servers are sync again if this error happens so it would be nice if plesk asks you: "Are you sure?" with a simple yes and cancle button.
12 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Enable IPV6-Only DNS through Plesk
Enable IPv6 Only DNS through Plesk for windows server 2012 to publish applications in Apple store.
12 votesThank you for your input. We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.—
IG -
Add ability to set up 128 value for flags field of CAA record
Add ability to set up 128 value for flags field of CAA record as it can be used as security measure.
11 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
— AY
-
Ability to add CNAME for Domain Root
Please add the possibility to add a CNAME for rootdomain instead of an A-record, so-called CNAME flattening feature.
11 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
NAPTR
Possibility to add NAPTR records in Plesk
11 votes -
Clarify that underscores are automatically added by Plesk when creating SRV records
Just Place some text on the SRV "add record" page to clarify that users don't have to add underscores to the service- and protocol names.
If they do, there will be two underscores and Office 365 won't validate.
11 votesThank you for your input. We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.—
IG
- Don't see your idea?