Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
27 results found
-
Setting primary NS server in SOA record
For now the first registered NS Entry of all listed NS Entries will be the primary NS. Without knowing this it's really difficult to find out which NS will be the primary NS. The outcome of this is a wild change of NS Entries and hoping that the correct entry will be the primary. It would be great if you actually can choose the primary, at least an information what and why will be the primary.
29 votesThank you for reporting this bug, we have confirmed it (bug ID for your reference: PPP-14761). Note: only feature requests are allowed here, so we would appreciate if you post bugs and issues on our forum at https://talk.plesk.com. We are closing this request, since it does not contain any feature suggestions.
— AY
Update: the bug was fixed in Plesk Obsidian Preview (8 May 2019).
-
Add Values in Priority of Service and Weight of Service in SRV Records
hi,
we are currently using Parallel Plesk 11.0 version and there is one requirement from microsoft provider to add the exact same values in SRV Records.
Priority of Service = 100
Weight of Service = 1but these values are not available in the dropdownlist. attached are the screenshots.
So i kindly request to add 100 value in Priority of Service and 1 value in weight of service.
8 votesThank you for reporting this bug, we have confirmed it (bug ID for your reference: PPP-37487). Note: only feature requests are allowed here, so we would appreciate if you post bugs and issues on our forum at https://talk.plesk.com. We are closing this request, since it does not contain any feature suggestions.
— AY
-
forward A record to http url
forward DNS A record in to http url
4 votesCould you please explain your request in more details? How you see A record redirecting to an URL?
UPD: Unfortunately, we are closing this request as no information was provided over 2 months.
—AK
-
dnsmng --update should increase the zone serial number
dnsmng --update should increase the zone serial number.
Also, there should be a command/line way to re-generate all zones.2 votesThank you for reporting this bug, we have confirmed it (bug ID for your reference: PPP-37247). Note: only feature requests are allowed here, so we would appreciate if you post bugs and issues on our forum at https://talk.plesk.com. We are closing this request, since it does not contain any feature suggestions.
The command `plesk repair dns -sync-zones` should help re-generate all zones.
— AY
-
to add the DNS record type OPENPGPKEY
Добрий день!
Я зіткнувся з проблемою при налаштуванні DNS для домену alefinvest.xyz. Виконав команду:
$ drill openpgpkey.alefinvest.xyz
отримав наступний результат:
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 42590
;; flags: qr rd ra ; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; openpgpkey.alefinvest.xyz. IN A;; ANSWER SECTION:
openpgpkey.alefinvest.xyz. 300 IN CNAME wkd.keys.openpgp.org.
wkd.keys.openpgp.org. 3599 IN A 37.218.247.27;; AUTHORITY SECTION:
;; ADDITIONAL SECTION:;; Query time: 692 msec
;; SERVER: 127.0.0.53
;; WHEN: Wed Sep 4 22:09:13 2024
;; MSG SIZE rcvd: 93Моя ціль - додати інформацію про завантажений публічний GPG ключ у секцію…
1 voteThank you for your input. UserVoice is intended for feature requests and product improvement ideas. Thus, if you are seeking advice it will be best to consider our Forum page ( https://talk.plesk.com/ ) or Support team ( https://support.plesk.com ). With that being said, we are closing the current request. Thank you for your understanding.
-- SH
-
Clear Domain Remnants
Not sure if it is a local problem with my hosting provider, or a global software problem.
I had plenty domain aliases.
I deleted them as domain aliases, and then tried to add them as main domains.I received the error: "This DNS record already exists."
And I could not add the domains.So either the software is not set to clean domain remnants, when a domain is being deleted, or it is a local problem with my hosting provider.
1 voteNote, only feature requests are allowed here.
If you have any problems, please contact Plesk Support Team or ask assistance on the official Plesk forum https://talk.plesk.com
—
IG -
No more plesk!!!
Comeback to cPanel please. No more plesk!!! 2 days working and I kan't configure DNS... :(
1 voteNot a feature requests.
Contact Plesk community https://talk.plesk.com for help or ask the assistance of Plesk Support Team.
—
IG -
MX life duration
How to precise life duration as 84600 sec. for an MX record please
Thanks
PR1 voteTo solve your issue, please browse https://kb.plesk.com for Knowledge Base articles that might have a solution. If you don’t have any luck there, open https://cscontact.plesk.com/ and file a ticket. Also you can ask assistance of Plesk Community on Plesk forum http://talk.plesk.com
We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Use PowerDNS as a slаve DNS
Nameservers are running PowerDNS and they automatically create new DNS slаve zones if they receive a NOTIFY from preconfigured IP's.
Plesk server were added to the list of IP addresses on the slаve DNS.
Now, it is required to modufy configuration in named.conf as follows:options {
allow-transfer { x.x.x.x; };
notify yes;
also-notify { x.x.x.x; };
};But /etc/named.conf file does allow custom configurations only if it is between these lines, which is outside of required section:
// -- PLEASE ADD YOUR CUSTOM DIRECTIVES BELOW THIS LINE. --
// ...
// -- END OF YOUR CUSTOM DIRECTIVES. --1 voteSorry, but PowerDNS is not supported DNS server for Plesk. We can’t consider problems with your customization as feature request.
You can vote for PowerDNS here https://plesk.uservoice.com/forums/184549-feature-suggestions/suggestions/6473577-powerdns-support—
IG -
Use PowerDNS as a ***** server
Nameservers are running PowerDNS and they automatically create new DNS ***** zones if they receive a NOTIFY from preconfigured IP's.
Plesk server were added to the list of IP addresses on the ***** DNS.
Now, it is required to modufy configuration in named.conf as follows:options {
allow-transfer { x.x.x.x; };
notify yes;
also-notify { x.x.x.x; };
};But /etc/named.conf file does allow custom configurations only if it is between these lines, which is outside of required section:
// -- PLEASE ADD YOUR CUSTOM DIRECTIVES BELOW THIS LINE. --
// ...
// -- END OF YOUR CUSTOM DIRECTIVES. --1 voteSorry, but PowerDNS is not supported DNS server for Plesk. We can’t consider problems with your customization as feature request.
—
IG -
1 vote
Note: only feature requests are allowed here, so we would appreciate if you ask assistance on our forum at https://talk.plesk.com. We are closing this request, since it does not contain any feature suggestions.
—
IG -
im having so much trouble with a domain who can help me???
i need help an your pohnes in mexico dont work
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Make a verbose error for the not installed Bind DNS
While trying to add/change Public IP address the following error is shown: ERR [panel] Argument 1 passed to DnsManagerCommon::updateDomainDNS() must be an instance of Dns_Zone, null given, called in /opt/psa/admin/plib/Ip/Task/UpdateReal.php on line 36:
Could you please make this error more verbose? For example: Bind must be installed to make this change.
Thanks in advance.
1 voteThank you for reporting this bug, we have confirmed it (bug ID for your reference: PPP-37155). Note: only feature requests are allowed here, so we would appreciate if you post bugs and issues on our forum at https://talk.plesk.com. We are closing this request, since it does not contain any feature suggestions.
— AY
-
1 vote
To solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately we cannot help with this particular request, because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Include DNSSEC in backup/restore
Recently I had to restore a couple of domains with DNSSEC and found that DNSSEC had been disabled during the restore.
This basically means that dns was not working (because the restored domains had no signatures) until the DNSSEC had been re-enabled and the new keys had been copied to the registrar.
Would it be possible to include DNSSEC data in the Plesk backup/restore functionality?
1 voteIt looks like mostly like bug but not a feature request. Therefore I’d suggest you fill the corresponding report to https://talk.plesk.com/forums/reports.746/
This report will be forwarded to developers for the further fix.
Thanks.
—
IG -
https://seth68.seeweb.it:8443/smb/web/view
Please Provide access to English
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately we cannot help with this particular request, because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
your Servershield By Cloudflare is not working
Please check your CloudFlare services extension is not working.
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Automatic default DNS Template on newly added Subdomains and Domains
When adding a domain or subdomain, I have to enable PHP (I assume for security reasons) and apply the DNS template. For someone who has dynamic subdomains, this can become a pain.
I'd love some optionality to always enable, or disable PHP & apply the default DNS template on any future subdomain or domain(s) added.
I see no reason why the DNS template isn't applied by default when adding a new domain and would love the option to always enable this by default when, adding domains.
1 voteCould you please clarify a little bit why do you think that DNS Template is not applied when adding domain?
The server-wide DNS template is a list of DNS records. Every time a domain is created in Plesk, its DNS zone is populated with DNS records according to the DNS template.UPD: Sorry, we are closing the request as no information were provided for over a month.
—
IG -
Port 587
How can i open port 587.
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
ET -
Subnets in SPF record not allowed
I am not sure why are you even parsing TXT record values, because those can be random text, but one of our clients were trying to add following SPF record:
v=spf1 include:_spf.google.com ip4:85.119.184.0/21 ~all
syntax of it is perfectly valid but failed with error (see screenshot).Later we tried adding ip addresses one by one and it worked, but if this is intentional then this is by far the most annoying "feature" you have ever implemented.
1 voteThere is no validation of the structure of TXT record values, except total string length and printable characters, so Plesk accepts the “clean” string from your example without any validation errors. It is possible that you’ve entered some non-printable characters.
Sorry, but we are closing this item because it is not a feature request. We would appreciate if you ask questions about Plesk and report bugs found in Plesk using our forum (http://talk.plesk.com/).
Thanks!
— ES
- Don't see your idea?