Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
- or
944 results found
-
Is mail service activated on a domain? Make this more obvious
Make it obvious on the mail overview page whether or not the mail service is activated. Currently, you need to go into "mail settings" before you can tell. This is unintuitive.
2 votesUnfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
Mail Server should have optional setting to block exe, com, vbs files with our without attachment.
Presently can't find settings in Dr.Web Antivirus to block common virus attachments such as exe, com, vbs etc. Suggest there should be an option in Mail Server settings to block emails with unwanted executables files with or without zip files.
Yesterday received an email with virus with exe attachment passing through Dr.Web. After two hours I tested the same attachment and the attachment was succesfully blocked by Dr. Web. Obviously Dr. Web virus definition were not updated with this virus earlier.
9 votesThank you for your input!
Unfortunately, we have to close request because over the years it has not become popular enough to include it in implementation plan.
—IB
-
speed limits for hosting server over ftp.
It would be very nice to have a possibility to limit for all uploads via ftp. Imagine what will happen if You have a unlimited disk for some hosting plans and all users all (about 40) are uploading their 4k videos on server. If there will be possibility to limit upload speed, then ok, otherway they will use all Your network capacity,......
2 votesThank you for your input!
Unfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
Improve mail alias removal in Plesk GUI
Currently email alias "remove" button does not exist for the first mail alias in Plesk GUI. It is unclear how to remove the first alias.
It is required to be able to remove the first alias just as the other aliases.
3 votesMail aliases can be fully removed.
-- PD
-
Create the option "Maximum number of incremental backups to store" on Plesk
Currently it is possible to limit the "Maximum number of full backups to store" which is valid for Full backups only, it would be good to have a similar option to limit the "Maximum number of incremental backups to store"
6 votesUpd: Sorry, we are closing the request as no information was provided for over a month.
—
IG -
Mail on update - Plesk
Function to send an email to administrators to notify an update or a upgrade of PLESK
5 votesCould you provide more details? Now Plesk sends mail after each update. Do you want get mail about available updates?
UPD: Sorry, we are closing the request as no information were provided for over a month.
-
One mail server for all subscriptions
I want to create just one mail server for all subscription
Like
smtp.example.com
imap.example.comAnd that settings needs to be for all subscriptions.
3 votesNo additional information has been provided for this request during several months. As mentioned before we believe that this feature is already available, because you can simply use the host name as the single-point mail server address. You can also have an SSL certificate on that name.
-- PD
-
Replicate mailboxes from post office to plesk mail interface.
Create a script that allows for mailboxes within our mail server that are not present in plesk to be replicated into plesk mail interface. Basically the mchk.exe tool in reverse.
2 votesThank you for your input!
Unfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
More control of DKIM
We could really do with more control of DKIM, for example...
Ability to control key length 1024Bit or 2048Bit (server wide)
Enable subdomain signing, while you can't create email accounts for subdomains in Plesk, it's often the case that the server is named as a subdomain eg: mail.example.com Which means unsigned mail leaving the server (cron etc) even when example.com is hosted.
The standard OpenDKIM package allows you to add it to nonsmtpdmilters so sendmail mail gets signed.
Ability to change the selector.
We really can't have mail leaving servers not being signed...it defeats the…
99 votes"1. Ability to control [DKIM] key length 1024Bit or 2048Bit (server wide)"
is available since Plesk 18.0.55, published August 29th, 2023
https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18055
"4. Ability to change the [DKIM] selector"
is available since Plesk 18.0.56, published Ocotber 10th, 2023
https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18056
Stay in the loop for more to come.
-- PD
-
Introduce Email Signature/Disclaimer management
Plesk controlled signature/disclaimer management
1)per user
2)per URL
3)server wideplesk or email in drop down and in the text field
- signature at user-level (user@sld.tld) | eg: Regards Mr. Abc
- signature at domain-level (*@sld.tld) | eg: Company xyz, Address
- signature at server-level | eg: "Nessage was tested against spam by xyz-freemail.com"
Every "snippet" should be added from level | in this example:
"regards
Mr. Abc
Company xyz
Address
Message was tested against spam by xyz-freemail.com"A client approached me with exactly this request
what I could get working was the following:
https://www.howtoforge.com/add-disclaimers-to-outgoing…218 votesThank you for your input! We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
—
ET -
More options for bandwidth limiting
I have installed "Bandwidth Limiter For Apache support (mod_bw)"
First: In 11.5.30#35 I can't see the link for setting this component.
See: http://forum.parallels.com/showthread.php?298876-How-to-limit-the-bandwidth-for-a-websiteSecond: In this tutorial; https://manage.grabweb.net/knowledgebase.php?action=displayarticle&id=970 I see that the setting is scarce. Why? the mod habe much more very usefull options. Look here: http://linuxpoison.blogspot.de/2012/02/setup-and-configure-bandwidth-limiting.html
Sorry to say, but the exists setting is impractical. The destination for this mod is to slow down attacks from ONE IPs. Not to slow down all legal IPs. This is bad practise.
So I wish the features or tutorial to limit:
- per-user bandwidth limiting
- Maximal…
2 votesUnfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
Update or Status notifications from the WP-Toolkit by E-Mail
In the Plesk WordPress Toolkit there is so far no possibility to switch on a notification if something changes in the status of a page. e.g. SSL / security settings or the latter and most interesting updates! For WordPress there are several plugins that take over the update notification function, but they don't always work. But since the WordPress toolkit has the function, it would be great if you could turn on an e-mail notification!
6 votes -
Cluster mail server
I use Plesk for mail server if it could be cluster for 2 server redundancy it is really perfect.
1 voteAt the moment there are no plans to expand the existing NFS storage and centralized database failover solutions to a mail server cluster. This request has not gained popularity, we must decline it.
-- PD
-
recipients of "Application Updates" mail
The mail is being sent to the mail address defined in
/modules/wp-toolkit/index.php/domain/settings/id/<nnn>
It is also being sent to the customer´s mail address.
This may be helpful or not, it would be better to give an option to which recipients the mails should be sent.
Also more than one address, comma-separated, may give more comfort.1 voteThank you for your input!
Unfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
Make possible to manage limit_req_zone for nginx
modbw cannot be used for limiting connection when nginx enabled. Plesk does not provide out of box enabling and configuring limitation of connections for nginx. Please add support for limitreqzone which provide similar functionality as modbw for nginx so that it would possible to control such resources.
40 votesWe will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
However, please be aware that rate-limiting web traffic can and should normally be done using iptables as it is much more effective and resource savvy doing it on the operating system/kernel level. If there are issues with web traffic, it is best to not to let it get to the web server in the first place.
-- PD
-
Mail filters should also be migrated when using the plesk migrator
Mail filters should also be migrated when using the plesk migrator
/var/qmail/mailnames/example.com/jdoe/sieve/*
3 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.—
IG -
Allow the displaying of mail passwords for a domain.
When you enter the mail settings in a domain there should be a link to view all passwords or mail the list to an Adminsitrator. Clients want a complete list of all their passwords.
2 votesPlesk will not show passwords in plain form.
Please find a way to re-phrase your request in different form, i.e. for which purpose someone would need their password. We can consider implementing this function without password exposure.
-
Secure Plesk UI and mail server with Let's encrypt during Plesk installation
During installation, both Plesk and the Plesk mail server are automatically secured with a free self-signed SSL/TLS certificate.
That leads to SSL warning when you open Plesk panel and you have to do additional actions to secure Plesk with valid certificate.
The idea is that if Plesk hostname point to this server - install Let's encrypt certificate to secure Plesk UI and Mail server during Plesk installation.
If hostname can not be resolved or points to another server - install self-signed certificate.4 votes-- PD
-
Implement the possibility to limit resellers' plan by the server administrator.
Now, service plans offered by the resellers can be modified by themselves and propose resources over reseller's service plan offered by Plesk's admin.
It would be good if the resources the resellers can offer in their service plan could not be "unlimited" anymore, but with the maximum caped to what's set by Plesk's administrator.
4 votesThank you for your feature request. We will consider the possibility of its implementation if it becomes sufficiently popular and in demand.
—
IG -
Show and manage external Zimbra mail accounts in Plesk
Native Integration with External Zimbra server.
21 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
—
IG
- Don't see your idea?