Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
697 results found
-
Plesk is very very slow
Plesk is very very slow
1 voteTo solve your issue, please browse https://kb.plesk.com for Knowledge Base articles that might have a solution. If you don’t have any luck there, open https://cscontact.plesk.com/ and file a ticket. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
1 vote
We are closing this request, since it does not contain any feature suggestions. If you have additional information about this issue or want to get advice from the community, please go to our forum at https://talk.plesk.com.
Thank you.
—
IG -
Use PowerDNS as a ***** server
Nameservers are running PowerDNS and they automatically create new DNS ***** zones if they receive a NOTIFY from preconfigured IP's.
Plesk server were added to the list of IP addresses on the ***** DNS.
Now, it is required to modufy configuration in named.conf as follows:options {
allow-transfer { x.x.x.x; };
notify yes;
also-notify { x.x.x.x; };
};But /etc/named.conf file does allow custom configurations only if it is between these lines, which is outside of required section:
// -- PLEASE ADD YOUR CUSTOM DIRECTIVES BELOW THIS LINE. --
// ...
// -- END OF YOUR CUSTOM DIRECTIVES. --1 voteSorry, but PowerDNS is not supported DNS server for Plesk. We can’t consider problems with your customization as feature request.
—
IG -
We do not see how a customer in the customer view can change the IP address under "Webhosting Access". If a customer has a dedicated and a s
We do not see how a customer in the customer view can change the IP address under "Webhosting Access".
If a customer has a dedicated and a shared IP, how can he change the IP's?1 voteWe are closing this request, since it does not contain any feature suggestions. If you have additional information about this issue or want to get advice from the community, please go to our forum at https://talk.plesk.com.
Thank you.
—
IG -
your tech support is very poor, i suggest to improve a knowledgeable technical support engineers. Very poor no solution..
your tech support is very poor, i suggest to improve a knowledgeable technical support engineers. Very poor no solution..
1 voteSorry, but this is not a feature request for our product. Therefore, we have to close it.
—
IG -
You lots are Scam, so I purchased your service and the next day you suspend an account that was just created with zero activities?
You lots are Scam, so I purchased your service and the next day you suspend an account that was just created with zero activities? What other reasons could you have other than stealing from me?
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
ImunifyAV
https://www.plesk.com/extensions/revisium-antivirus/
Cannot find this extensions in my plesk catalog
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Plesk UI > Domain > domainname > Docker Proxy rules: add option to map several external ports (e.g.80 and 443) to ports of docker container
Plesk UI > Domain > domainname > Docker Proxy rules: add option to map several external ports (e.g.80 and 443) to ports of docker container.
2 votesThank you for your input! It looks like a bug; I have created a bug report for it (bug ID for your reference: EXTDOCKER-81).
Note: only feature requests are allowed here, so we would appreciate if you post bugs and issues on our forum at https://talk.plesk.com. We are closing this request, since it does not contain any feature suggestions.
— AY
-
Stop disconnecting me every few minutes. I have lost work and downloads!
Stop disconnecting me every few minutes. I have lost work and downloads!
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
1 vote
Please do not post refers to already closed request. Fill correct report with all necessary details, desired usage scenario and expected benefits.
Thanks.
—
IG -
Use PowerDNS as a slаve DNS
Nameservers are running PowerDNS and they automatically create new DNS slаve zones if they receive a NOTIFY from preconfigured IP's.
Plesk server were added to the list of IP addresses on the slаve DNS.
Now, it is required to modufy configuration in named.conf as follows:options {
allow-transfer { x.x.x.x; };
notify yes;
also-notify { x.x.x.x; };
};But /etc/named.conf file does allow custom configurations only if it is between these lines, which is outside of required section:
// -- PLEASE ADD YOUR CUSTOM DIRECTIVES BELOW THIS LINE. --
// ...
// -- END OF YOUR CUSTOM DIRECTIVES. --1 voteSorry, but PowerDNS is not supported DNS server for Plesk. We can’t consider problems with your customization as feature request.
You can vote for PowerDNS here https://plesk.uservoice.com/forums/184549-feature-suggestions/suggestions/6473577-powerdns-support—
IG -
pésima atención
pesima atención no tube acceso a mi panel de control y nunca me solucionaron mas me echaron la culpa a mi que nada tengo que ver. no solo eso la atención no es 24 horas y en temas de servidor esto no funciona. me equivoqué en contratar este servicio.
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
To speed up your plesk equal to Cpanel. Hire good developer to make more efficient.
To speed up your plesk equal to Cpanel. Hire good developer to make more efficient.
1 voteThanks for the recommendation. I think the speed of the hosting panel primarily depends on the qualifications of the administrator.
—
IG -
suddenly, without any notice or options.. i can no longer 'edit in html' on my website?!
I have had my website for approx 12 years now and it is hosted by Go-Daddy and uses PLESK admin.. I used the 'edit in html' feature to make updates to my website as needed.. 'out of stock' notations etc and suddenly, without any notice I can no longer do this.. leaving my website with notations that need changing.. what do i do?
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
1 vote
To solve your issue, please browse https://kb.plesk.com for Knowledge Base articles that might have a solution. If you don’t have any luck there, open https://cscontact.plesk.com/ and file a ticket. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Bakwas Panel i have ever seen
Bakwas Panel i have ever seen
1 vote -
no decompression
无法解压 /httpdocs/No services.zip：Unable to start (C:\Windows\system32\cmd.exe /c C:\Program Files "(x86)\Parallels\Plesk\admin\bin\7z.exe t -tzip G:\PleskVhosts\camedio.net\httpdocs\No" "services.zip "): (1260) This program is blocked by group policy. For more information, contact your system administrator. at Plesk impersonation(PipeServer::ServerThread::impersonateRunAs line 726) at Unable to unpack archive G:\PleskVhosts\camedio.net\httpdocs\No services.zip(UnpackArchive::onRunAsUser line 2709)
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
Plesk file manager window error
please improve user interface there are many error on file manager page .It shows black window in plesk.
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG -
I have a list with blocked senders (known spam), can I upload that list so it is blocked at the source?
I have a list with blocked senders (known spam), can I upload that list so it is blocked at the source?
1 voteWe are closing this request, since it does not contain any feature suggestions. If you want to get advice from the community, please go to our forum at https://talk.plesk.com. Thank you.
—
IG -
Installation failed: 500 Internal Server Error <!--[if lte IE 6]><![endif]--> Internal Server Error The server encountered an internal error
Installation failed: 500 Internal Server Error <!--[if lte IE 6]><![endif]--> Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator to inform of the time the error occurred and of anything you might have done that may have caused the error. More information about this error may be available in the server error log. Web Server at airouz.com <!-- - Unfortunately, Microsoft has added a clever new - "feature" to Internet Explorer. If the text of - an error's message is "too small", specifically - less than…
1 voteTo solve your issue, please contact your hosting provider (the company that hosts your website) and request support from them directly. We are the authors of the software you and your hosting provider are using, and unfortunately, we cannot help with this particular request because we do not host your website. We are closing your request as it doesn’t include any software improvement proposal.
—
IG
- Don't see your idea?