Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
37 results found
-
Update NodeJS extension to support version 16
DiscordJS API Version 13 requires NodeJS 16.6 or higher
https://discordjs.guide/additional-info/changes-in-v13.html#before-you-startI would like to update my discord bots to discordJS v13. :)
13 votes-- PD
-
Optimize Google Auth: Remember successful authentication for n days
Hello,
I think it can be good to ask "Remember 30 day" after the Google Authenticator login. And ask again if the IP or Broswer is not authenticated.
Write to code each time is very long.
Thank's
11 votesThe Google Authenticator extension supports remembering successful authentication for up to 90 days.
-- PD
-
SSH Terminal access with another administrative user
The root user is disabled on the server for security reasons.
It is required to configure SSH Terminal extensions to log in with another administrative user9 votesWe assume that this request is based on a typical configuration where "permitrootlogin" in the SSH configuration file is set to "false" and the requirement is to being able to use the SSH extension for Plesk admin accounts anyway. For that case the workround can be applied: Simply add the lines
Match Address 127.0.0.1
PermitRootLogin yesto the /etc/ssh/sshd_config, then reload SSH service once (# service sshd reload). It will then still not be possible to login with "root" from external sources, but it will allow the extension to log you in with an admin account. https://support.plesk.com/hc/en-us/articles/4410634559250
-- PD
-
Update Ruby Extension to support Ruby 2.6.x
The current version delivered with the extensions are quite old. Ruby 2.4.4 is nearly a year old (28.3.2018) !
Please provide the current stable versions, see https://www.ruby-lang.org/de/downloads/ :
- 2.6.1
- 2.5.3
- 2.4.56 votesThe Ruby extension is continuously updated and supports newer Ruby versions.
-- PD
-
Create an extension to connect to Amazon S3
Create an extension that allows you to backup to Amazon S3
5 votes -
Update NodeJS extension to support Node 10, 11, 12
I'have a node application that needs the version 10 of NodeJS.
An update to this extension wouldn't be bad.3 votesNodeJS version 10 is supported in upcoming Plesk Obsidian.
—
IG -
Ability to select a branch during the initial deployment via Git Manager extension
Currently, when adding a git deployment, there is no ability to select the branch, and it should be selected afterwards.
This leads to unnecessary actions and it would be much easier to work with git by having the ability to select the branch during the initial deploy.
3 votesOn the initial deployment, the branch can be selected in the second step of the deployment action. Please see the example screenshot.
-- PD
-
Google Auth also for customer not only admin
Actually 2 step is supported only for admin account.
Please implement also for customers.
https://talk.plesk.com/threads/google-authenticator-for-plesk-clients-query.362201/2 votesGoogle Authenticator has always been available for admin and clients. To see the option you might need to open the drawer on the right-hand side of the panel.
-- PD
-
Change location of Mail Importing button
The Mail Importing option from the Site Import is located at main Dashbord tab and not at Mail tab.
It would be more convenient to have it on both tabs.2 votesThe "Mail import" button was moved to the mail dashboard some while ago.
-- PD
-
please ad owncloud to the webapps
please add the owncloud solution to the webapps
2 votesThere are no plans to add Owncloud, but why not use the successor Nextcloud? There is an extension available for it from the extension catalog.
-- PD
-
Add the option to monitor the Disk I/O in Advanced Monitoring
Add the option to monitor the Disk I/O and Latency in Advanced Monitoring, as it would save a lot of time for the Users and Support, as with a graphical output you would directly see in the history that there is something wrong with io performance on the disk. Currently , we only have a real-time performance of Disk I/O via Process List or to use iotop utility.
2 votesThis feature is already available since Plesk Monitoring 1.2.0, the graphs is available under the "Disk" tab. The graphs can be not shown in some cases if operation system does not provide Disk related metrics (e.g. if Plesk is running inside a Virtuozzo container; in that case, it makes sense to monitoring Disk metrics on the host system).
If you prefer external monitoring and would like to have all metrics are collected centralized, this feature is also available. Since Plesk Monitoring 2.0.0, it is possible to integrate the Plesk Monitoring extension with 360 Monitoring (see https://360monitoring.com/product-features/server-monitoring/ for details).
—
AY
-
Add Yandex Disk Backup For Your Extension Catalog
it would be great if you could add yandex disk to your extension catalog
2 votes -
Cloudflare command line tool for activation
There are command line tools for managing extensions, but cloudflare is not in the list.
Also there is no opportunity to use this utility to activate the extension.
If those two opportunities will be added, it will be easier to activate this extension on many servers an once.
2 votesWhat do you mean “not in the list”?
- plesk bin extension -l | grep servershield
servershield – ServerShield by Cloudflare
Also you can activate and deactivate it with
- plesk bin extension —disable servershield
- plesk bin extension —enable servershield
—
IG - plesk bin extension -l | grep servershield
-
WHMCS Module: add possibility to login to Plesk by hostname, without port 8443
It is possible to adjust Plesk to login to Plesk UI without entering the port (8880 / 8443). Add option to WHMCS Module: login to Plesk by hostname, without port 8443.
2 votesThank you for your input!
To solve your issue, please browse https://support.plesk.com/hc/en-us/articles/213945625 for knowledge base articles that might have a solution.
—
IG -
Please update node js version 20
My application need node version 20 or above..Thanks.
1 voteThank you for your suggestion. Node.js version 20 is already available on Linux Plesk servers. Newer Node.js version can be enabled on the settings page of the Node.js extension. Node.js version 20 will soon become available to Windows too.
-- KvD
-
Add LuaSandbox (for MediaWiki)
In the early 2010s, to offer better support for logic and faster processing, MediaWiki started supporting Lua through the Scribunto extension. Scribunto has grown out to become a mature, well-maintained and popular solution (it is, for instance, heavily used on Wikipedia, to mention the best known wiki), but those on shared hosting currently have to miss out. Please let the next version of Plesk ship.with LuaSandbox (https://www.mediawiki.org/wiki/LuaSandbox, https://pecl.php.net/package/LuaSandbox), the safest way to run Lua code.
1 voteLuaSandbox is a PHP extension that is available as a PECL module. Since December 2022 (Plesk Obsidian 18.0.49) you can easily add such PECL extensions to PHP from within Plesk. You can manage PHP extensions in your "admin" account in Tools & Settings > PHP Settings > choose the desired handler > Manage PECL Packages.
-- PD
-
please add Cgroups support Ubuntu 22.04 x86_64
please add Cgroups support Ubuntu 22.04 x86_64
1 voteThis feature is already available since version Plesk Obsidian 18.0.44.
Let us know if you have any feedback.
— AY
-
Manage certificates on a domain via CLI
It'd be a great to be able to manage(assign/unassign) certificates on the domain level via CLI.
1 voteIt is possible with certificate CLI utility: https://docs.plesk.com/en-US/obsidian/cli-linux/using-command-line-utilities/certificate-ssltls-certificates.39009/
--
IG
-
SSLit - overview certificates
It would be helpful if the SSLit extension provided an overview of all issued certificates for the plesk administrator.
1 voteTo see an overview of all certificates, please click on the "Open" button of the SSLIt extension in the Extensions Manager.
-- PD
-
Let's encrypt staging backend for tests
I am trying to develop a bash script that will create a domain and letsencrypt certificate on my UNIX server, but I've run into a limit from lets-encrypt.
Looking at https://letsencrypt.org/docs/rate-limits/ it talks about using a staging server for development purposes. Is it possible to add this option to letsencrypt extension?
Someting like:
plesk bin extension --exec letsencrypt cli.php -d ..com -m admin@***.com --test
Or changing the Let's encrypt URL via panel.ini
1 voteThis feature is already available in the Let's Encrypt extension.
To configure different ACME URL (e.g. a staging environment for testing purposes), need to configure "acme-directory-url=https://acme-staging-v02.api.letsencrypt.org/directory" option for the section "[ext-letsencrypt]" in the panel.ini file.
- https://docs.plesk.com/en-US/obsidian/administrator-guide/plesk-administration/.78586/
- https://letsencrypt.org/docs/staging-environment/
— AY
- Don't see your idea?