Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
434 results found
-
Add abilty to set the main subscription domain as sender address for the subscription cronjob notiffications
Add abilty to set the main subscription domain as sender address for the subscription cronjob notiffications. For example sysuser.@example.com instead of sysuser@hostname
2 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Cancel a runing cron Task
I see a runing cron, but i can't cacel if started twice.
2 votesThank you for your feature request. We will consider the possibility of its implementation if it becomes sufficiently popular and in demand.
—
IG -
Possibility to chose and setup the installation directories on Plesk installation or migration
It would be great to have the option to setup and fine-tune the Plesk configuration at a install directories level (Installation, vhost directories...), should be an option from the beginning (I.E.: On installation, migration, etc...).
At the moment the possibility is present bunt by modifying the Plesk configuration files after the installation has been already done.
2 votesThank you for your feature request. We will consider the possibility of its implementation if it becomes sufficiently popular and in demand.
—
IG -
Locale management features
It would be very convenient if you'll to add a new locale management(merging/splitting) feature, since plesk2smb.php is absent since Plesk 18.0.31:
Although if that's possible, to adapt plesk2smb.php to the next versions of Plesk that'd be good.
2 votesIt is planned in scope of integration with CrowdIn localization system. Big files like common/application/admin/resources/languages/ca-ES/messages_ca-ES.php will be split into small chunks similar to en-US locale.
—
IG -
Allow advertising to customer accounts
Hello,
I think that advertising could do with a bit of attention. When customers login, they do not see ads (which is a good thing), however it’d be a pretty good idea to show custom ads to customers (not just server admins). Say for example, I use Plesk Web Host edition and have multiple customers. I want to advertise addons on my store, such as disaster recovery solutions. When custom ads are added, it should be shown to all users who use Plesk, not just the administrator.
Extension addons for Plesk however should remain hidden from customer accounts as they…
2 votesThank you for your feature request. We will consider the possibility of its implementation if it becomes sufficiently popular and in demand.
—
IG -
Disable the option to modify the CAS trust level as customer/reseller level
As for the moment it's only possible to apply specific option to change server-wide the CAS trust level.
the option allows changing the CAS trust level for individual websites via tools & settings > ASP.NET, based on the documentation:
https://docs.plesk.com/en-US/obsidian/administrator-guide/web-hosting/configuring-aspnet-windows.60322/If you do not select this checkbox, websites will use the server-wide setting. Otherwise, each website will be able to have its own CAS trust level specified in the website’s hosting settings.
The idea is creature a feature/option to remove the option as customer or reseller to be able to change/modify the CAS trust level.
2 votesThank you for your feature request. We will consider the possibility of its implementation if it becomes sufficiently popular and in demand.
—
IG -
Don't Let us to upload file when our login is time outed
Hi
when our login to Plesk panel is time outed, if we upload something , the Plesk panel allow us to upload but after upload it showes an error message. And then if we log out and log in , Plesk can upload easily.2 votes -
2 votes
-
Introduce new event parameters when a Wordpress instance is created
Introduce new event parameters passed by Event Handlers that will differentiate full domain and full subdomain name when handling WordPress instance creation.
For example: at the moment, ${NEWDOMAINNAME} variable will hold full name for subdomain when processing WordPress instance creation event and it would be helpful to have ${PARENTDOMAINNAME} variable for such case
2 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
add functionality for pre-install checker to check supported components and prohibit installation on case unsupported components are found
It would be great to not have an ability to install Plesk on a system that is using a component (database server, e.x.) that is not supported by the Plesk version.
Please consider implementing the functionality of the pre-install checking of unsupported components. It can prevent issues with Plesk on the servers with unsupported software.
Such an idea has already been provided once, however, it was too specific (for database servers only): https://plesk.uservoice.com/forums/184549-feature-suggestions/suggestions/20166910-prohibit-installation-on-unsupported-databases.2 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Add an ability to encode parameters sent in custom button URL
Currently, parameters passed to the custom button URL are put there in plain text (even FTP user password).
As the custom button URL is using GET request, the parameters can be easily replaced by anyone which is not secure and doesn't allow using custom buttons for logging customers into a third-party service (e.g. billing).
Please consider implementing an option to securely encode URL parameters so only the receiving side can decode them.2 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important. — IG
-
Edit WordPress notification text
Text notifications are hard-coded in WP file /usr/local/psa/admin/plib/modules/wp-toolkit/resources/locales/en-US.php:
+++
'common.error.wp-cli.timeout' => 'WordPress Toolkit was not able to finish running an operation on this site in %%timeout%% seconds, so the operation was terminated. This could mean that your WordPress installation might be infected with malware. Check the wp-config.php file of the installation for potential malware code or run an anti-virus scan. If you cannot find any traces of malware, try running the operation again later.',
+++It is not possible to edit parameters "<suspicious_instance_text>" and "<suspicious_instance_details_info>" under Plesk > Tools & Settings > Notification > WordPress installation is quarantined
2 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Ability to show which IP addresses are used by other domains in the pulldown list at Web Hosting Access
If the account has multiple domains, it is possible to set a dedicated IP belonging to that account among several domains, but in some cases you may want to allocate one IP to one domain. (E.g. when setting reverse DNS lookup)
Currently, the pulldown list at domains>%domain name%>Web Hosting Access displays both free IP and the IP used in other domains by the same account, but it is not possible to understand whether it is used by other domains or not.
Suggest to add the possibility to indicate which IP addresses are already used by other domains in the pulldown…2 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Ability to manage "Smart static files processing" option via Service plan
It would be good to add the ability to manage "Smart static files processing" option through Service plan settings. Since this option is enabled by default, it might affect some applications.
2 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Ability to create/extract archives protected by password using File Manager
Due to security reason users may need to ability to protect their archives with password. Currently there is no ability to extract or create such archive. Please, add
2 votesThank you for your input. We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Better email notifications management through CLI
Improve the email notifications management through CLI using the "plesk bin notification" command.
As of now, there are plenty of notifications that can be easily managed in Plesk GUI while it is not possible through that command making it quite hard to manage as the ones that can not be managed through the command itself, need to be modified directly on the Plesk database while in Plesk GUI all (or almost) the notifications are unified under Tools & Settings > Notifications
2 votesThank you for your input. We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Change (or add option to select) value that is used for the customer’s account root
Currently, when a subscription is created and the customer adds new domains, the following physical structure is created on a server:
C:\vhosts\primary.domain\new.domain
where primary.domain is the primary domain of the subscription and new.domain is another domain, created by the customer.
Sometimes, in this scenario, a number of new domains created by the customer might be quite big, so physical structure becomes something like this:
C:\vhosts\primary.domain\new.domain
C:\vhosts\primary.domain\new1.domain
...
C:\vhosts\primary.domain\new199.domain
C:\vhosts\primary.domain\new200.domain
In these circumstances, when the primary domain's name is changed, for example:
primary.domain changed to newprimary.domain so physical structure is changed to C:\vhosts\newprimary.domain*
There is a lot of data that has…
2 votesThank you for your input. We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Obsidian Scheduled Tasks update has less functionlity due to cron style Version 18.0.25 Update #2
Version 18.0.25 Update #2 Windows
New Cron style schedule tasks. This was such a poorly thought out feature to implement and as such a bad one.
It's great that Plesk want's to standardise the control panel between platforms but now in the case of Windows servers the experience is worse than before. Previously there were checkboxes that you could tick, so if you wanted a task to execute every 5 minutes then you could just ticket the appropriate boxes.
Now in attempt to bring cron style to Windows without the / character this has become really laborious having to enter…
2 votesThank you for your input. We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Migrate/move scheduled task with Plesk windows to a different subscription
I would like to suggest the feature move scheduled task created under a subscription level to another subscription.
With Linux, it's possible to modify /var/spool/cron/crontabs but windows such changes it not possible.
Thank you.
2 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Stop sending the user back to the root path in file manager after clicking on refresh
In the file manager, when I press the refresh button of my browser, plesk changes the path to the root path of domain rather than refreshing the actual folder path.
For example:
I have a domain called tomydna
It is a wordpress installation
So, sometimes, I want to go to wp-content/cache/ to see if cache files and folders are created. Sometimes, I must click on refresh button to see if the server just created new files or new folders.
Unfortunately, when I press the refresh button of my browser there is an unexpected behavior, Plesk sends me back to the…2 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG
- Don't see your idea?