Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
41 results found
-
use Let'sEncrypt specific domain ssl on mail server per domain
i tried tricking dovecot adding this :
local domain.tld {
protocol imap {
sslcert = </opt/psa/var/modules/letsencrypt/etc/live/domain.tld/fullchain.pem
sslkey = </opt/psa/var/modules/letsencrypt/etc/live/domain.tld/privkey.pem
}
}
it worked, for Imap !but trying the equivalent on postfix, didn't work for smtp
-o smtpdtlskeyfile=/opt/psa/var/modules/letsencrypt/etc/live/domain.tld/privkey.pem -o smtpdtlscertfile=/opt/psa/var/modules/letsencrypt/etc/live/domain.tld/fullchain.pemPlesk automatically creates mail.domain.tld on DNS, and if you see information about how to log to the email: it says connect on domain.tld
but it throws a warning about the original ssl certificate.It could be so good if everything were automatic, the Plesk way :)
6 votesI think this feature request is addressing SNI. SNI with Let's Encrypt certificates has been around in Plesk for a long while. To use your own custom mail domain with SSL, simply take these two steps:
1) When you create or reissue the SSL certificate, check "Assign the certificate to the mail domain".
2) In the "Mail Settings" of your domain, select that certificate from the drop down box "SSL/TLS certificate for mail" and store the change.
-- PD
-
Allow us to put any password we want
It is impossible to create strong pasword, most of users are forgetting their passwords because it is too hard with different symbols and numbers.
2 votesJust go To Security Settings and choose there “Minimum password strength” as “Very weak”. These passwords are typically short and use only one type of characters (lower or upper-case characters or digits). Example: password. This security level prevents simplest password-guessing attacks.
—
IG -
View a board of Smtp queue
View a board of Smtp queue list to see if Serveur is working correctly and if nothing stop the serveur during sending messages
6 votesThis function already exists in two different variants:
1) If you want to see stuck mails that are still sitting in the mail queue for future delivery attempts:
Tools & Settings > Mail > Mail Queue
2) If you want to see what is going on in the mail log beyond the unsent mails from the "Mail Queue", then please use the free "Log Browser" extension https://www.plesk.com/extensions/log-browser/. It includes a "Mail" tab where you can see and filter the maillog, too.
-- PD
-
13 votes
Autodiscover is already available since Plesk Obsidian. Simply check "Enable mail autodiscover" on the mail settings page of a domain. Please see how it works on https://support.plesk.com/hc/en-us/articles/360009747280.
There is no need to add an alternative solution that does the same.
-- PD
-
Allow email accounts to change their own Webmail/SMTP/POP3 passwords without creating a Plesk user
We have lots of staff members who need an email address, but should not have access to Plesk in any way at all. Currently, the only way for them to choose a password, is to choose one and tell the Plesk Administrator what that password is, and have the Plesk Administrator configure their password for them. This is extremely unsecure. Something as simple as a 'send password reset link' button in the Email account configuration would work. This button would send an email to that account, and allow the email user to click on the link to change their Webmail/SMTP/POP3…
8 votesNo Plesk user account is needed to change the password of a mailbox. Instead, the user can login into his mailbox using webmail and change his password out of his webmail access. For example use Roundcube: Login to the mailbox in Roundcube, then click "Settings" > "Password" to change the password of the mailbox. The only requirement that this works is that the "Mail password change service" is allowed in the firewall, because password changes using a mailbox require a specific port. The port is open by default.
-- PD
-
Server-wide e-mail settings - Blacklist
- Function extension: bad domains with wildcard app, such as "* .bad-domain.tld or "?.*.bad-domain.tld", similar to spam blacklist?
- Possibility of uploading txt file, similar to spam blacklist?
The problem: We have currently registered over 900 bad domains. 30% is held by domain variants.
1 voteThere is server wide white and black list settings in Tools & Settings → Mail Server Settings → Server-Wide Mail Settings → Black / White list. It allows wildcards in domain names.
—
ET -
Add "Move to spam folder" option in Windows (currently available in Linux)
There is an spam filtering option to "Move to spam folder XXXX" on Linux, but not on Windows (Plesk 11+).
Unfortunately, horde doesn't work so well and every time when a message with broken header arrives, horde displays "Invalid Address" and no subject to all inbox messages. The described fix in https://kb.plesk.com/en/121175 doesn't work in this cases, forcing us to find the broken message manually (or scripting something to do the dirty job).
This feature should exists in Windows env as in Linux.
68 votesThis feature is available in Plesk for Windows like in Plesk for Linux. It is located in the Spam Filter Settings of a mailbox and named "Move spam to the 'Junk E-mail' folder"
-- PD
-
Upgrade MailEnable in Windows editions to support SSL/TLS
The Windows edition of Plesk is currently using MailEnable as its E-Mail server and it is a community edition (Standard) which does not support secured services such as SMTP/s, IMAP/s, POP3/s. So its the only problem for us to get PCI compliance unless we buy it ourselves with a higher annually price. The Plesk company may deal with them for upgrading at least to the Professional edition and make it available in licensing with a suitable monthly price.
6 votesGood news everyone :)
Starting Plesk Onyx 17.5 the installation contains Mail Enable 9.10, which supports SSL/TLS in Standard edition. -
Outgoing mail control for scripts
We need a outgoing mail control for scripts...
Similar to the normal outgoing mail control..6 votesThere is an option in Plesk 12 and 12.5 to limit outgoing mail for subscription sent by scripts:
Settings for outgoing mail control
….
Allow scripts and users to use Sendmail. Scripts and users will be able to send email messages by using Sendmail even if the limits for a mailbox and domain are exceeded. The maximum number of messages can be sent will be defined by the limit for a corresponding entire subscription. Messages are sent on behalf of the subscription’s system user.
—ET -
Dmarc
Add SpamAssassin GUI in Plesk (for Windows).
http://spamassassin.software.informer.com/download-spamassassin-gui-interface/
1 voteYou can configure Spamassassin in Plesk UI already. Just go to Tools&Settings → Spam Filter.
It is not a good idea to install any third-party software for SA configuring beside the Plesk.—
IG -
to make it possible to create multiple e-mail adress
When i create a new subscription, i need to create more e-mail addresses. I need to write mail addresses and passwords in a single screen to gain more time.
1 voteTo create multiple mail accounts on different sites within one packet, use multiple create nodes for corresponding Plesk XML RPC API request – http://docs.plesk.com/en-US/12.5/api-rpc/reference/managing-mail/creating-mail-accounts.34499/#o34501
—
IG -
All non standard ports (other than port 25) for use by smtp protocols to send mail
All non standard ports (other than port 25) for use by smtp protocols to send mail.
The reason is some ISP's block port 25 on smtp
1 voteIf SMPT port 25 is not working from your end, kindly enable Submission Port from Plesk – http://download1.parallels.com/Plesk/PP12/12.0/Doc/en-US/online/plesk-administrator-guide/59430.htm
—
IG -
Possibility to activate DKIM and DomainKey without active local DNS
Please make possible generating and activating DKIM/DomainKey without having active local DNS server. Consider following situation:
You have a website that use as sender your domain when sending email and you are want to follow best practices in order to reach inbox, but this domain uses another server for DNS (cloudflare for example, godday, etc.). In this case you need to have DKIM/DomainKey signed mails without the need to activate local DNS server. Also mail management could be set off for that domain, but mails still should be able to be signed.
I believe that this scenrario is real and…
118 votesThis feature is available since Plesk 18.0.35, published April 20th, 2021. The “Mail Settings” page of domains now shows a hint how to enable DKIM signing for an external DNS server. The hint shows the exact DNS records users need to add to the DNS server.
-- PD
-
auto-reply not more than once
Hello,
I would like to the possibility to set an auto-reply not more than once every X days instead of only not more than X per day...
Is this possible ?1 voteYou can achieve this with special scheduled task for /usr/local/psa/bin/autoresponder command with status option. See more details with /usr/local/psa/bin/autoresponder \--help Lets us know if it doesn't help. --- IG
-
autodiscover for email settings for linux and windows
autodiscover for email settings for linux and windows
544 votes -
1 vote
We already provide Horde webmail on both Linux and Windows, in addition to other webmail clients like Roundcube or SmarterMail.
—AK
-
1 vote
-
Show spam filter score in email headers
It would be great, if the spam filter adds the spam score to the email header, so one can review them and alter the threshold accordingly.
1 voteX-Spam-Status header and ability to add score to subsject are present in Plesk
-
Add max_connection to server-wide email settings
I frequently run into the problem not to be able to connect to my email server. The log shows: "Maximum connection limit reached"
If you have multiple email accounts, say for different domains, and you use them on your laptop, iphone and ipad, the connections sum up very quick one or the other can't connect anymore.
To get rid of this I'd like to have an option inside server wide email settings to be able to set MAXDAEMONS and MAXPERIP for courier-imap service, so I don't have to patch the
/etc/courier-imap/imapdmanually.4 votesOptions “Maximum number of connections (IMAP, POP3, IMAP over SSL/TLS, or POP3 over SSL/TLS)” and “Maximum number of connections for a user per IP address” already exists in server-wide Mail Settings in Plesk Onyx 17.8
—
IG -
Enable Whitelist and Blacklist for Email
It would be very useful to add domains or email addresses to whitelist or blacklist so that my whitelisted domain doesn't show SPAM-Whatever in the subject or my blacklisted domains/emails never show up
5 votesThe feature is available in Plesk since version 12.0.
- Don't see your idea?