Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
1631 results found
-
Allow SMTP authentication with incoming mail disabled
Having the mail server enabled for a domain makes all mail go to it internally, even if the MX records of the domain point to another server.
The option to disable incoming mail resolves this, but doesn't allow Plesk to send mail over SMTP for that domain, only PHP mail.
This is not preferable because this mail can't be encrypted nor signed with DKIM. Therefore, for security, Plesk should have an option to disable incoming mail while still allowing SMTP delivery by using the public MX records.
4 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Add "issuemail"-property tag for CAA-Records
When creating a CAA record, you can only choose between "issue", "issuewild" and "iodef". Certificate Providers like Sectigo have begun enforcing CAA-Lookups. (See https://www.sectigo.com/knowledge-base/detail/CAA-Record-Certification-Authority-Authorization-1527076091491/kA01N000000zFMO )
For a S/MIME certificate the propery tag needs to be "issuemail". Could you add this to the selection of CAA record property tags?1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Add Percona support
Support and shipping (installation) of Percona server
2 votesThank you for your input! We will consider introducing support for Percona in upcoming releases if there is considerable demand.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Disable HTTP/2 support on Plesk Interface
Give to the administrator the ability to disable HTTP/2 using the Plesk GUI in Plesk Windows
2 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
In the meantime, please following the instruction from our documentation on how to disable HTTP/2 through the command line.
-- SH
-
Exclude specific parameters from syncing with the Service Plan on unlocked subscriptions
The option to exclude certain parameters such as hard disk quota from syncing with the Service Plan on unlocked subscriptions can be provided in Plesk.
3 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Add option to hide DKIM management
We haven an external DNS cluster and an external customer panel in which customers can manage things like DNS records etc.
We have implemented a function through which we can let the customer enable DKIM through the external panel, which enables it on the Plesk server, retrieves the key, and adds the key to the zone on the DNS cluster
In order to avoid conflicts and confusion we would like to hide the DKIM settings in Plesk for the customer on the subscription level.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Queue emails over limit in a domain instead of defearring
If you have activated a limit and the limit is reached, all further mails are rejected. It would be good if for these emails to remain in the mail queue and be sent automatically after the set time for the limit has expired.
4 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Add email list impot from plain-text file for white or black lists
When adding email to white or black list, Plesk only gives the option to write manualy one address, and you need to click link to add another one. If you made a decent mannagement of your dmarc responses, and extract spam emails or domains from received email, you have a list too large to write by hand. An option to import a plain text with an email address or domain or top level domain really is a must.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
In the meantime, assuming that you are referring to the Blacklist in Server-wide mail settings, as a workaround, you can use the following command to import the entries from txt files:
For Blacklist:
cat your_blacklist.txt | while read i; do plesk bin mailserver --add-to-black-list $i;done
Please make sure that you have each entry on a new line.
-- SH
-
Detect and notify of vulnerabilities in NPM packages within Node.js extension
Detect and notify of vulnerabilities in NPM packages within Node.js extension
3 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
In the meantime, you may consider using npm audit, for example.
-- SH
-
Please provide an indication that my new installed Sophos extension is in use at the domain level I cannot verify that the Sophos extension
Please provide an indication that my new installed Sophos extension is in use at the domain level
I cannot verify that the Sophos extension which I just purchased is activated indivdually for each of my mailboxes.
I received the following instructions from my host:
"Enable Sophos in Mail Server Settings
Navigate to Settings -> Mail Server Settings -> Antivirus -> Sophos to activate the feature.
Activate Sophos for Each Mailbox
Finally, Sophos must be activated individually for each mailbox to ensure coverage."However, Plesk shows I activated Sophos server wide, and the other shows no mention of Sophos under the…
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Link WP Toolkit notifications/error pop-up messages to the corresponding website
Notifications/error messages in the popup windows have no reference to the affected domain/s.
It would be helpful if you included the name of the affected domains in the popup messages.2 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important
-- SH
-
Add SMIMEA Record in DNS
Add the SMIMEA record in the DNS-system.
This is required for encrypted email communication.There is no need to set up an automatic system, just the option to create an individual record.
The 63-character restriction must be removed, otherwise the hash of the address is too long and will be rejected.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
SSL It CLI for enabling DANE support
It would be nice to have the ability to enable DANE support via the CLI.
2 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Cloudflare records exclusions
A very cool feature would be to exclude individual records in the zone from sync / export to Cloudflare and the choice by auto-update to only update / create records without removing whole Cloudflare zone.
In my particular scenario I am serving mts-sts. via Cloudflare worker. Everytime Plesk update DNS zone on Cloudflare the particular mta-sts. record is deleted. This record can not be created in Plesk, because it is a worker trigger.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Update Nextcloud instances via CLI by bulk
Please include a feature to be able to update several or all Nextcloud instances to the latest version via CLI as a bulk operation instead of updating one by one manually.
2 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Possibility to convert Plesk server with AlmaLinux 8 to AlmaLinux 9 OS
Add possibility to convert Plesk server with AlmaLinux 8 to server with AlmaLinux 9 OS
3 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Add to Plesk possibility of installing certificates from ACME-compliant services other than Let's Encrypt
In Plesk, there is a Let's Encrypt which is an ACME-compliant vendor of certificates. It would be good to have another one or the possibility to implement other ACME-compliant certificates via Plesk tools. For example JPRS: https://jprs.jp/pubcert/about/ACME/index.html
2 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Configure SSL in phpMyAdmin to access remote MySQL instances
Give the customer ability to configure SSL for phpMyAdmin when accessing remote databases.
3 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Make Composer advisories configurable to only notify for production vulnerabilities
Add a setting to change the Composer warning advisories to only trigger on production vulnerabilities, so that non installed dev dependencies don't trigger warnings
2 votesThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
add time-expiring fail2ban whitelist entries
Please add the ability to add IP addresses to a temporary whitelist with an expiration option. Occasionally, customers may need to troubleshoot issues (e.g., verifying their mail account credentials) after being banned by Fail2Ban. To prevent them from being immediately banned again, we whitelist them temporarily. However, over time, if you forget to remove them, the whitelist grows indefinitely. It would be beneficial if these entries could automatically expire and remove themselves after a set period.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
- Don't see your idea?