Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
1651 results found
-
Add email list impot from plain-text file for white or black lists
When adding email to white or black list, Plesk only gives the option to write manualy one address, and you need to click link to add another one. If you made a decent mannagement of your dmarc responses, and extract spam emails or domains from received email, you have a list too large to write by hand. An option to import a plain text with an email address or domain or top level domain really is a must.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
In the meantime, assuming that you are referring to the Blacklist in Server-wide mail settings, as a workaround, you can use the following command to import the entries from txt files:
For Blacklist:
cat your_blacklist.txt | while read i; do plesk bin mailserver --add-to-black-list $i;done
Please make sure that you have each entry on a new line.
-- SH
-
Please provide an indication that my new installed Sophos extension is in use at the domain level I cannot verify that the Sophos extension
Please provide an indication that my new installed Sophos extension is in use at the domain level
I cannot verify that the Sophos extension which I just purchased is activated indivdually for each of my mailboxes.
I received the following instructions from my host:
"Enable Sophos in Mail Server Settings
Navigate to Settings -> Mail Server Settings -> Antivirus -> Sophos to activate the feature.
Activate Sophos for Each Mailbox
Finally, Sophos must be activated individually for each mailbox to ensure coverage."However, Plesk shows I activated Sophos server wide, and the other shows no mention of Sophos under the…
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
View Full Content of Stuck Email in Queue
I would like to see the full content of the email that is stuck in the queue, rather than just the email headers and similar information. Currently, it is quite cumbersome to retrieve this information through the shell, and being able to view it directly would save considerable time and effort.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Be able to change URL structure of domains in Preview mode
The preview in "Quick Preview" mode only allow a basic preview, without usage of SSL/TLS certificates, as the URLS begin with the IP address, like this:
http://111.222.333.444/plesk-site-preview/www.some-website.com/The "Quick Preview on a domain name in Plesk" could be improved. It allows to select an existing domain as a "support" for previewing websites. This sounds promising, as a SSL/TLS certificate already exists on this domain name.
But the problem is that the preview Urls generated by Plesk now use a different structure based on subdomains, like this: http://some-website.com.212-83-133-74.preview-domain.com/
This is rendering this functionality cumbersome : need to add this "some-website.com.111-222-333-444" subdomain…
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Adhoc Backup Location
When using the Plesk mobile application please provide an ability to put an adhoc backup to a defined location, rather than allowing the backup to reside in the default location of the active databases.
1 voteThank you for the clarification. We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Code Auto Indent
Automatically indenting code will be a very useful feature, similar to various other IDEs such as Notepad++ & VSCode to name a few. It will help in keeping the code aesthetic & clean and also allow the next person who will work on it to get a very quick understanding of the "flow of logic". Thank you.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
List of all cronjobs/scheduled tasks by Plesk XML-RPC-API
It seems that there is currently no way to list all cronjobs of all domains on a Plesk server.
https://plesk.github.io/api-schemas/1.6.8.0/agent_input.svg Does not show any option if I search for "cronjob", "task" or "scheduled".Please add packet > scheduled-task > get > filter > site-id.
As we manage more and more domains, an overview is missing.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
--AA
-
Keep custom outgoing mail limit in input box when turning on "unlimited"
Situation: When "unlimited" outgoing mail is turned on, a custom value previously present in outgoing mail limits is removed from the input box. When turning "unlimited" off, a user needs to re-type the previous content into the input box(es).
Why it should be easier: An outoing mail limit needs to e lifted for planned mass mailings. After the mailing was sent, the previous limit needs to be set again. However, this happens not immediately after the mailing. On servers with many users, the previous custom values need to be saved/noted manually so that the correct previous values can be restored.…
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Each subscriber restarts their IIS
I am a subscriber, not a reseller. When IIS goes down, we subscribers don't have to raise the service again. Suggestion, if this pool is separated by subscriber, would it be possible to restart just my IIS?
1 voteAt this point, there is no option to rest the IIS pool on a subscriber-basis.
Thank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Show current version in the bottom of client panel
I'm using a dedicated server from an ISP. I would like to see in the current version and name of plesk in the client panel.
I added an example image, please review it.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-
Streaming software
Hello.
Please integrate a live streaming video option in Plesk!!
Why is this not possible?1 voteWe will consider including Jinzora in the extension catalog if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
In the meantime, I believe you should be able to manually install it without an issue:
-- SH
-
separate user group for iwpd users
For plesk on windows
It would be helpful if plesk created a separate user group for all IWPD users.
That would allow me to set specific security settings to that group.
See this kb article as an example: https://www.plesk.com/kb/support/access-to-cmd-exe-and-powershell-exe-how-to-allow-it-to-subscription-users-and-deny-to-iis-users-on-a-plesk-server/
Because the IWPD user and account user are in the same psacln group we cannot use that group to block cmd or powershell access (since the domain account apparently needs to be able to run those commands).
The workaround revolves around manually creating a new security group and manually adding those users to the new group, the obvious problem with that…
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Integrate Enhanced ERP System Management Capabilities
It would be highly beneficial if Plesk could develop and integrate advanced features for ERP system management, particularly for platforms like Odoo. This could include seamless synchronization between Plesk and ERP databases, improved tools for managing ERP-related web applications, and enhanced security protocols specifically designed for ERP environments. By offering these functionalities, Plesk would significantly streamline the administration of ERP systems, providing users with a more cohesive and efficient management experience.
Recommended ERP: https://www.impactfirst.co/id/erp/software-erp
1 voteThank you for your input.Thank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
Manually disable server-wide and database options in the Performance Booster extension
Ability to manually disable server-wide and database options in the Performance Booster extension
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important.
-- SH
-
SSL settings per plan restriction
Hi it would be nice to have in plan permission settings, to disable access to SSL (both those from extensions as well as LetsEncrypt) Settings for Hosting Plan, not user as it was sugested. Exactly the same way it has been done with SiteJet Builder.
I have some customers who are non-technical, so less options in the Panel then better for them.
1 voteThank you for your suggestion. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
-- KvD -
Add method to REST API to manage domain default DNS zone settings (for DNS TTL management)
Currently when using the REST API to get the DNS records of a domain, no TTL values are returned for records unless their TTL values have been changed by the user manually. That's because (by default) DNS records inherit their TTL values from the default DNS zone settings of a domain. However these default DNS zone settings cannot be viewed or managed by the Rest API. Meaning that the default TTL values for DNS records can be viewed using the REST API.
Resulting in a deficiency for users who want to use the REST API to properly manage DNS records.
1 vote -
CLI command to activate inactive scheduled tasks
Create a Plesk command like "plesk bin task_manager --start-inactive" that can activate inactive scheduled tasks.
1 voteThank you for your suggestion. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
-- KvD
-
Preset the option to block XML-RPC requests for new WordPress installations
Hello!
It would be nice to have a feature where one can select XML-RPC to be blocked for all newly installed WordPress websites installed via the WordPress Toolkit in Plesk.
At the moment, only the option to preset disabled wp-cron.php is available, but no such option is present for blocking requests to XML-RPC.
The customers never use it, but also do not block it from their end and it is a hassle to do it manually for every new WP site.
Would it be possible to add such a feature to the WP Toolkit settings?1 voteThank you for your suggestion. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
-- KvD
-
Plesk Backup & Restore IV - protocol functionality
Plesk Backup & Restore IV
I personally think it's better to save all backup logs in a MariaDB / mySQL database table so that I can search for problems there later. So searchable logs with timestamps and users per domain / all domains, sometimes also by topic such as "email" / "database" / "files" / "configuration"
1 voteThank you for your suggestion. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
-- KvD
-
Plesk Backup & Restore III - Wrong Option
The output during import in any combination whether "database only", "files only", "configuration only" is really insufficient, no information is passed on, e.g. the individual steps mentioned above, when importing a "domain" the domains all run as above, but for which task and how far the individual task is completely missing. Perhaps the old progress bar should be kept and another one should be shown where the individual steps are carried out, the more details the better.
At the end after the import, unfortunately you can only see the "date and time" and not what was imported at all. I'm…
1 voteThank you for your input! We will consider this functionality in upcoming releases if it becomes popular.
Everyone, please continue voting for this feature if you consider it important
-- SH
- Don't see your idea?