Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
259 results found
-
sort, archive or filter (not spam) email on server directly when received
I'm using different (imap) clients on different devices to read emails. Many of them can be sorted / filtered / archived in specific subfolders by subject, sender or similar.
Most - but not all - clients can be configured to do so - but this means also to reconfigure several clients on rule changes.So i'd like to suggest the possibility to handle emails on receiving on the server.
E.g:
- if sender ends with "domain.foo" or subject contains "project bar" then move to folder bar and mark as read
- if sender is "foo@domain.bar" forward to "…6 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.— rk
-
Don't send Auto-Reply when message detected as spam
Don't send Auto-Reply when message detected as spam
When a mail account has Auto-Reply and Spamassassin enabled, the Auto-Reply function should read the x-spam header and, if the incoming message was found to be spam, the automatic response should not be sent.
At the moment I often see Automatic replies stuck in the outgoing mail queue because they're being sent to spammers. This is silly!
60 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
-
Enable fetchmail feature
I would like to enable and configure fetchmail on mailbox level. Main reason is easy migration for customers to new hosting providers including moving mails from existing mail servers.
"fetchmail" is already installed together with PLESK, needs just to get properly configured.
48 votesThank you for your input! We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
— ES
-
Check details about POP3/IMAP/SMTP traffic for single email
Sometimes is useful check the details about POP3/IMAP/SMTP traffic for a single email, to look and find problems.
70 votesThank you for your input! We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.—
IG -
disable automatic greylisting activation for new domains
If i add a new domain in a subscription, greylisting is automaticly activated, just because it's enabled on the server.
It would be much better if customers have to activate greylisting manually in their settings, like the spamfilter.
A workaround with Event Manager is possible but a bit inconvenient.
39 votesThank you for your input! We will consider this functionality in upcoming releases.
We have created internal document with ID PPM-569 for your reference.
Everyone, please continue voting for this feature if you consider it important.
—
ET -
Implement DNS Whitelists
Plesk does not currently support DNS Whitelists like it does RBLs, such as the list at dnswl.org. There needs to be a way to add this from the Plesk UI.
The Postfix main.cf config directive is permitdnswlclient.
Whenever a Plesk upgrade happens, the setting, if added is removed and needs to be added back manually.15 votesThank you for your input! We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
—
IG -
DKIM - needed to import own keys
DKIM - needed to import own keys
It is not fair solution that Plesk generate a private key, and i cannot extract and date them in a seperate Backup
Please let us import our own DKIM keys
30 votesOne good reason why it is important to use own DKIM key is that for sending mail from different servers that service the same domain (e.g. during a migration) the key on the target needs to be the same as on the source.
We will consider this functionality in upcoming releases if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
-- PD
-
Add to Server-Wide Black List and White List block by IP adress and DOMAIN name.
Server-Wide Black List blocking only by domain name is insufficient, because spammers can spoof real sender adress. Not every sender has SPF record configured. And also email White List needs whitelist by domain name to block common spammers with no fixed IP.
18 votes -
Integration of Sympa - http://www.sympa.org
To use Sympa instead of Mailman
22 votesThank you for your input. We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.—
IG -
Show currently/recently mail sending scripts
Use case: One of our customer has uploaded files to his ftp server in a public internet cafe and his password was stolen. Afterwards there was a mass spam mail sending script on his webserver. Our server has been landed in black lists. It was very difficult to find and correct it.
11 votesThank you for your input! We will consider this functionality in upcoming releases, if it will be popular.
Everyone, please continue voting for this feature if you consider it important.
For now you can use the solution described in https://kb.plesk.com/en/114845
—ET -
Roundcube for Windows
Roundcube for Windows
20 votes -
Dovecot: mdbox and alternate storage support
http://forum.odin.com/threads/dovecot-mdbox-and-altmove-support-in-plesk.334620/
It would be really handy if we could, via Plesk panel or some cli utility, o switch from Maildir to mdbox as mailbox storage format and enable alternate storage for old emails. This way we can optimize the disk usage by using the fast storage media for recent emails, while the old stuff can go on a slower, cheaper media. Will also help a lot in growing our mail customer base without forking out ridiculous amounts of money for expensive fast disks arrays to keep up with the growth rate.
25 votes -
Required External/remote Mail server
Required External/Remote mail server like mailenable, smartermail with different server.
30 votes -
Custom Email Server Help Tips
The settings for mail servers have a help tip in the email addresses management page, and in the users' Plesk Account pages.
If a Plesk server is set up strictly as a mail server, and has DNS handled remotely, the settings in the Help Tips can be incorrect.
Currently the tips only show the server as the root domain even if the mail server's actual DNS points (as an example) mail.domain.tld to the server, requiring the settings to include the subdomain.
If I add the domain as "subdomain.domain.tld" in settings, then the server tips are correct but the email addresses…
14 votesHi,
We’re looking into adding this functionality in one of the upcoming releases.
—AK
-
Blacklist of recipient target addresses in the spamfilter (useful for wildcard mailboxes)
Hello,
I miss the functionality of managing a blacklist of target email addresses in case you have a catchall email domain.
In most cases, the originator address of spam emails changes every time, but the target address is frequently used.
So with this functionality, I could drop out invalid recipient addresses, without giving up the setup to use catchall all emails <everything>@your-domain.
This is useful to register webshops or community everytime using a separate target email address to distinguish incoming email if they are valid or not.10 votes -
SPAM protection - Check if sender Mail domain exists
For better SPAM Protection it would be nice to add an Option to let the Mailserver check, whether senders Domain is existing or even not.
I got Mails from "Domain.xyz" wich is of Course no valid TLD.
"Reply-To" is of Course an valid Mail adress.On request, my Data-Center told me they could activate that Option, but while Plesk is Controlling that config, on next Plesk update the Change gets lost.
So: Could you add in Plesk that Feature as an Option?
16 votesThank you. As far as I remember this checking can be configured by spamassassin but anyway we will consider the possibility of implementing this feature in future Plesk releases.
—
IG -
Domain blacklist and subdomains - Spam fight
Into domains blaklist frequentelly we have subdomains sendind emails,
so block just a domain not solve the situation.i suggest a check option to block all subdomains as well,
please see the post forum for more info.
http://forum.odin.com/threads/is-black-list-server-wide-mail-settings-working.333066/#post-78064824 votesThank you for your input. We will consider the possibility of implementing this feature in upcoming releases.
— ES
-
Email Archiving for all incomming/outgoing emails
All incoming/outgoing mail for a certain domain is copied automatically to a different inbox within that domain.
68 votesLook at this solution for Postfix – http://webmasters.stackexchange.com/questions/57746/plesk-email-journaling
But anyway, thank you for your input! We will consider this suggestion in upcoming releases if it will be popular.
Everyone, please continue voting for this feature and add your comments if you consider it important.
—
IG -
Add possibility to change default webmail.<domain> subdomain to custom
At the moment by default any webmail interface is under domain webmail.<domain>
Some people would like to use custom one. For me personally it's important to have this as server-wide setting (I have basic workaround for this - custom domainWebmail.php), but it isn't perfect (many links to webmail service missing, e.t.c.).
And that's why we have plesk - user friendly interface.
421 votesAs UserVoice staff cleaned up the most of twisted voices, I’ve returning this suggestion to open discussion.
Everyone, please continue voting for this feature if you consider it important.
—IB
-
Allow creating separate E-Mail Adresses for Domain Aliases
I would like to be able to create own e-mail addresses for Domain Aliases. Let's say i have example.com as domain and add example.net as alias, now i would like to create e-mail adresses for example.net (alias domain) only which are NOT available on example.com and vice versa.
43 votes
- Don't see your idea?