Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
2092 results found
-
Reset/clear domain to default state
If something goes wrong on the main domain of the subscription it would be nice to reset the domain to a clean state without removing or restoring from the backup.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Show Apache and nginx main logs in Plesk GUI
Main webserver logs and othervhostsaccess.log should be visible in Plesk interface so that requests to server's IP address(es) can be tracked as well. Currently, only domain-related logs are shown.
As a use-case, if website is set as default on the IP address, it receives requests sent to the IP address, which are then not visible in Plesk.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Allow more options for "Period to check" value on Cgroups manaager
In Plesk's Resource Controller (Cgroups), the available values of "Period to check" are either too low, or too large. If set to 5 minutes, customers can receive far too many messages, but if set to an hour, important events are not notified. It would be good to either have more values to choose from, or a way to customize the value (panel.ini directives, for instance).
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Plesk repair tool move broken configuration files to a different location
check if all Directories linked from within apache AND/OR php configs are present” to Plesk Repair Tool … or even better to the corresponding restart logic of the process … and auto move broken conf file to another location on error … so only 1 website is down on such errors but not dozens …
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Add ability to change the domain name in links in the mail notification when customer is created
Add ability to change the domain name in links from the mail notification that's being sent upon creation of the new "Customer" in Plesk. It would be nice to not expose our Plesk hostname and instead use for password reset link some other domain name, that resolves to our server.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Change WPTK target instance name when copying an instance
When using the WPTK "copy data" feature, it also overwrites the name of the target instance with that of the source instance. This causes both target and source instances to have the same name, which causes confusion in other operations.
Is it possible to prevent the "copy data" feature from updating the target instance's name, or remove the instance names from the UI altogether?
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Create subfolder under the inbox folder.
There is a possibility to create a subfolder for the inbox folder of the email account via CLI.
For Dovecot, for example, with the following command:
# doveadm mailbox create -u email@example.com -s INBOX.newfolder
It would be nice to have an option to create such folders via Plesk UI.1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Information about Web Statistics user and credentials
Plesk interface should inform that in order to check Web Statistics it should use the FTP credentials. User's may think that they can use Plesk admin/reseller/customer login credentials. For example showing that information when hovering with mouse cursor or adding some info box
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
-
Provide WPTK with ability to manage NinjaFirewall plugin
Currently, WordPress Toolkit allows only deactivating of the plugin in
WordPress > example.com > Pluginstab. However, it should also be possible to activate it via WPTK, not directly in WP Admin dashboard.1 vote -
Provide ability to encode extensions before vertification and publishing
Starting from Plesk Onyx 17.8, support of the extensions protected by ionCube was stopped and now it's possible to get extension encoded only on Plesk RnD side and only when publishing it.
This way Plesk reseller cannot test it on clients' servers without exposing a source code.
1 vote -
Make Plesk Firewall add/change rules incrementally without restarting the whole service
Make Plesk Firewall add/change rules incrementally without restarting the whole service.
Now Plesk firewall reloads all rules in iptables when rules are changed in firewall (all rules are added anew). If there is a long list of blacklisted IPs or server is under a brute-force attack and there are a lot of IPs blocked by the Fail2Ban, adding/changing any rule via Plesk Firewall will cause server restart that is taking a lot of time due to a large number of blocked IPs.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Whitelist specific files inside password protected directory
Possibility to whitelite specific files inside domain's password protected directories (meaning that they wouldn't need to provide the username and password).
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Specify Node.js extension parameters programmatically
For automating Node.js setup it should be possible to set Node.js settings, like Document root , Application Startup File and variables without Plesk GUI.
1 vote -
Add custom support contact details to "help menu"
On the top right in the header there is an help icon with a "help menu" which contains use full links to documentation. It would be great if administrators could add custom contact details to this little help menu for their customers/users to see.
I've added a mockup image to clarify.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Strengthen WordPress Toolkit password policy to match Plesk's password policy
WordPress Toolkit doesn't have a strict password policy as Plesk has, as it allows very weak passwords to be changed to. Therefore, allowing WordPress Toolkit to have the same password policy as configured in Plesk or having a configurable password policy should increase security.
1 vote -
Clear yum cache from Plesk GUI
Plesk already has the function to update system packages, so it would be nice to be able to execute all the required operations from GUI.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Allow attachements in mailboxes added with ActiveSync in Outlook calendar items
Implement the functionality to add attachments to calendar items and invitations on mailboxes added via ActiveSync in Plesk Premium Email extension. Right now the button to add attachment to calendar and invitations is greyed out.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
1 vote
Thank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
User Role for specific extension
For example, it would be great to have a Customer John Doe that has only access to the SEO Toolkit extension.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Add ldap to store Plek users credentials so a spam filter can verify the Plesk users without making an SMTP connection.
Could you add a local LDAP server to Plesk to verify Plesk email users?
We currently use a spam filter (Barracuda). It has the ability to verify the recipient via LDAP. https://campus.barracuda.com/product/essentials/knowledgebase/50160000000IUSGAA4
/How+can+I+configure+recipient+verification+for+Barracuda+Email+Security+Service+-ESS-/This would be handy.
1 voteThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG
- Don't see your idea?