Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
397 results found
-
add magento 2 application
Is very difficulte to install Magento 2 on plsek 12.2 ist it possible add magento pre-install application
58 votesUpd: We have published Magento 2 APS package. Note: based on our research we assume that Magento app is targeted towards dedicated/VPS hosting, and it isn’t particularly feasible for shared hosting.
—AK
-
Display DKIM Public Key in the Web Interface
Currently the only way to get the DKIM key is to decode the private key from the shell when using an external DNS service, however it would be nice if the public key is just being displayed in the web interface so the user can see it and add it to the external DNS.
56 votesStarting from Plesk Obsidian 18.0.35 DKIM public key is shown in the pop-up window on the Mail Settings page of the particular domain.
-- PD
-
Support for Roundcube 1.4 (includes responsive support)
I've installed 1.4 manually and it works without problems.
52 votesRoundCube 1.4.3 is available since version Plesk 18.0.26 https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18026
—
IG -
Search File manager
We would like to request for the File Manager search function previously present in Plesk 10 to be reinstated in Plesk 11.5.
49 votes -
Support server-side e-mail rules
Most e-mail clients support configuring rules to automatically perform actions on incoming messages based on certain criteria. You could for instance have a rule that automatically moves a message into a folder based on the address of the sender, a rule that automatically deletes a message if it contains certain words in the subject, etc. Since most people are using multiple e-mail clients it's impractical to configure your rules in all of the clients you use (webmail, phone, desktop, etc.), so it would be great if Plesk allowed these rules to be configured server-side.
49 votesServer-side email rules are available with new Dovecot server in the latest Plesk 12.0 preview.
If you already tried Plesk 12.0, please tell us your opinion in https://docs.google.com/forms/d/10kOuXE5uFDtMf3SfqneS_CwlAxTHYl2eSFwJ-yNLAMg/edit
If you didn’t try Plesk 12.0 yet -
- Read our blog for additional information
http://devblog.plesk.com/2013/11/dovecot-in-plesk-for-linux-11-6/- download Plesk 12.0 from
https://sp.parallelsnetwork.com/parallels-plesk-panel-12-partner-preview/ (registration required)
or you can explore this function in Online Demo thereYou can comment and discuss this function in our Forum
http://forum.parallels.com/showthread.php?294313-Plesk-12-0-PreviewWe are looking for your feedback!
-
support Rocky Linux
Rocky Linux is bug-for-bug compatible with already supported OS (RHEL, and by extension since AlmaLinux makes the same claim - that too).
However, unlike RHEL and AlmaLinux, Rocky has broad industry support sponsored by Google, Microsoft, Amazon, Fastly etc. so I would like to see Plesk officially add support for Rocky.
48 votesSupported since Plesk Obsidian 18.0.41 version: https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18041
--
IG
-
SFTP (SCP, SSH, Rsync) Backup
My biggest dislike ist only FTP_SSL ist supported
48 votesYou can use “SFTP Backup” Plesk extension now – https://ext.plesk.com/packages/50e0dbd3-0fa3-45e8-ac4c-9333ade4de96-sftp-backup
With this extension, you can easily turn your Linux server into remote storage and use it to store backups via SFTP protocol. The extension is fully integrated with the Plesk backup interface and supports all operations available in Plesk backups.
—
IG -
Sort domains by traffic, disk usage
Curently there is no way to sort domains by traffic column. Not handy at all.
48 votesIn the latest Plesk Obsidian 18.0.38 domains can now be sorted by Traffic usage in Service Provider view.
https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18038
—
IG -
(De-)Activate mail service per domain ONLY
Currently you can deactivate email per subscription in mail settings, or use the Plesk command-lint utility domain with the appropriate settings. It would be more convenient to have a checkbox under the domain settings, or under Mail with a domain selection box.
47 votesThis function is available in the latest Plesk 12.0 preview.
If you already tried Plesk 12.0, please tell us your opinion in https://docs.google.com/forms/d/10kOuXE5uFDtMf3SfqneS_CwlAxTHYl2eSFwJ-yNLAMg/edit
If you didn’t try Plesk 12.0 yet -
You can download Plesk 12.0 from
https://sp.parallelsnetwork.com/parallels-plesk-panel-12-partner-preview/ (registration required)
or you can explore this function in Online Demo thereYou can comment and discuss this function in our Forum
http://forum.parallels.com/showthread.php?294313-Plesk-12-0-PreviewWe are looking for your feedback!
-
Change settings for mail autodiscover
Ability to change settings in the mail autodiscover - for example, to set the mail server that will be set in the mail client.
45 votesHi, you can now specify a custom domain name for mail autodiscover in “Tools & Settings” > “Mail Server Settings” since Plesk Obsidian 18.0.23 version (published at January 21st).
—
AA -
Wildcard for Let´s Encrypt
Let´s Encrypt already support wildcards, could you implement it to PLESK asap?
45 votesAvailable starting 2.6.0!
https://docs.plesk.com/release-notes/onyx/change-log/#17811-mu20180705
-
Increase migration speed
The current Migration Manager (Linux) is painfully slow. A full server migration (+/- 300GB of data) over Gigabit takes more then 12 hours. During this time lots of website will have changed MySQL data getting lost after the migration.
The issue with the migration system in its current state is that if does site-by-site migration. If migrates site A, then goes to site B, then C, etc, etc. Because each site migration consists of a alot of different steps the servers are mostly waiting for each other to finish some process like creating mailboxes.
The load on both the source…
45 votesIn 12.5 we changed from PMM that performed operations step by step to Migrator extension, which performs data transfer in multiple data streams. The feature to make it fully asynchronous operations not only for transfer stage as well as other performance improvements (specifically for Windows migrations) is in the cards.
Please let us know on https://talk.plesk.com if still have problems with migration speed.
—AK
-
Support dynamically assigned IPv6 addresses on Plesk for Linux
Currently, Plesk for Linux filters out IPv6 addresses that were assigned dynamically by use of Stateless Address Autoconfiguration, or other means: https://plesk.zendesk.com/hc/en-us/articles/115000239114
This greatly limits IPv6 functionality in Plesk due to the fact that all hyperscalers (Amazon, Google, Azure, Vultr, etc.) provide IPv6 addresses using the autoconfiguration method.
43 votesBeta support for dynamic IPv6 addresses was added to Plesk 18.0.27 version – https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18027
—
IG -
default chroot PHP cli should use Plesk panel PHP version & settings
Currently when a user uses SSH to execute PHP cli commands, it does not reflect the settings chosen in Plesk panel (it seems to be the default OS vendor PHP). While other PHP versions are available in "/opt/plesk/php/..." the current solution is neither ideal nor transparent to the user (most of them don't even know this path).
I suggest that the default chrooted PHP command
-) should use the same version as chosen as in plesk panel
-) and should use ini settings (memorylimit, maxexecution_time) as chosen in plesk panelIdeally this should even be possible on domain…
43 votesThe changes implemented in the Plesk Obsidian 18.0.44 release https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18044 The console now works using a domain’s PHP version instead of the system PHP.
-- AA / PD
-
Redirect from HTTP to HTTPS for secured webmails
You should place a redirect from http://webmail.domain.tld to https. Even the option "Hosting Settings > Permanent SEO-safe 301 redirect from HTTP to HTTPS" won't redirect the webmail; in any case these should be two separate options as the website may not support HTTPS yet.
41 votesHi!
The functionality is now available:
1. Linux: in the SSL It! Plesk Extension: https://ext.plesk.com/packages/3c4117f6-c05c-4d3b-9173-60f10096a9c4-sslit
2. Windows: in Plesk Obsidian (by default)How to find it in SSL It! Extension:
1. install SSL It! Extension (it’s available for Plesk 17.8+)
2. go to > SSL/TLS Certificates
3. if there is no SSL Certificate installed on the domain – issue one (using, for example, free Let’s Encrypt SSL Certificate)
4. if an SSL Certificate is installed on the domain, there is a switcher “HTTP→HTTPS redirect”, this switcher has an option “Webmail”, turn it on.
5. Voila!We would appreciate hearing your feedback on the implementation of this functionality. Thanks in advance!
— rk
-
Compile nginx with mod_security
Basically, the title says it all.
It can be done manually but then we wont be able to configure mod_security (rules, detection level, fail2ban) in Plesk.Please include mod_security in nginx.
41 votesSupport of ModSecurity for nginx became available in Plesk Obsidian 18.0.32 on December 8th, 2020. To enable it, please select ModSecurity 3.0 from the ModSecurity configurations page.
-- PD
-
Database permissions
It'd be handy to grant only specific permissions to certain database users (e.g. SELECT only for ready-only access etc.).
41 votesThis feature is already implemented in the upcoming Plesk 12.1 release. We encourage you to check the implementation in one of upcoming Plesk previews and let us know what you think. Everyone, thanks for your input and votes.
-
Graphical interface for Resource Controller (cgroups)
Create a graphical interface in case you have enabled CCgroups. Show in customer Panel graphs about cpu, ram, disk io like the plugin lve from cloudlinux
40 votesThis functionality is now available in the latest version of the Advanced Monitoring extension. We encourage you to check the implementation and let us know what you think.
Please visit the following forum thread to learn how to access the functionality: https://talk.plesk.com/threads/advanced-monitoring-extension-in-plesk.352727/post-888117
We would appreciate hearing your feedback on the implementation of this functionality. Thanks in advance!
— AY
-
Design a better responsive theme
Please design a better user interface for the control panel. It is awfully outdated and extremely ugly. Look at the Cpanel design, something simple like that.
39 votes -
Joomla toolkit (like Wordpress Toolkit in Plesk 12.0)
joomla support like wordpress in plesk 12
38 votesIt took a while, but good news to everyone.
Since yesterday Joomla Toolkit is available. You can install it via Plesk Extension Catalog or check it out at https://ext.plesk.com/packages/470269a6-5876-44f2-9af7-7f33e712b83e-joomla-toolkit
Feel free to post your feedback as a comment at the page above
- Don't see your idea?