Feature Suggestions
Please provide here your suggestion for new functionality for Plesk. We encourage you to review and vote for suggestions of others. The top-ranked suggestions are likely to be included in the next versions of Plesk.
Please write in English so that voters from all over the world can read and support your request.
Off-topic posts will be removed from here
- or
940 results found
-
indicate password strengh or acceptance during "reset password" process
There are many customers complaining, they have to try several passwords during the password-reset process, before one is accepted. There is no visual indicator if the typed password fits the safety regulations.
"Inside" plesk, the password strengh is indicated when they change theirs plesk- , FTP- or e-mail password. Why not during the reset-process?
The highlight would be an indicator, that permanently shows if the typed password is strong enough or has to be stronger (with a tooltip/hint, what specifications has to be met or which kind of character is missing).
5 votesGood news everyone!
This functionality was added in Plesk Obsidian RTM release. We suggest you upgrade to the latest version and check it out.
—
AA -
"Run Cronjob now"
Hello, I miss it again and again that I can test my scheduled tasks only if I change the times at once, the task will be executed and then I set the time back to the desired version. Better when I could the scheduled task to test without changing the desired times, a mouse click / run would be. I also an option, with which I can freeze the mail traffic for this task is missing, add it without a code or command to remove (> / dev / null 2> & 1). Sincerely, Danny
5 votesThis feature is already implemented in the upcoming Plesk 12.1 release. We encourage you to check the implementation in one of upcoming Plesk previews and let us know what you think.
-
Show overusing mailboxes if subscriber cannot be changed due to insufficient resources warning
When attempting to change subscriber for a subscription under a reseller, the following warning is returned:
Unable to continue subscription transfer: this subscription requires more resources than can be provided by the new owner's provider. However, the mailboxes exceeding the limit are not specified.It is impossible to see which mailboxes exceed limits, especially if there are hundreds of domains on the reseller.
The suggestion is to include affected mailboxes into the warning, or at least to provide a [GUI] tool to find such mailboxes among all subscriptions under the affected reseller.
3 votesThank you for your input. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
1 vote
Upd: Sorry, we are closing the request as no information were provided for over a month.
—
IG -
Send statistics Summary Report to several email addresses
Send statistics Summary Report to several mail addresses. Specify them by separating via colon or semicolon.
Currently it is possible specify only one email address in Tools & Settings > Summary Report > Send By Email.
3 votesThis request only got 3 votes in 4 years. It did not become popular so we must decline it. However, there is an easy workaround: Simply create an email address with a forwarding list and add the addresses where you want the report to be forwarded to that list. Then use the list address as the report recipient.
-- PD
-
Smart Email Log Dashboard
Currently, Plesk only allows a raw, line-by-line view of mail logs through tools like Mail Log Browser. However, there is no real centralized and user-friendly interface that enables users to easily and clearly review the history of sent and received emails on the server.
The idea is to provide a global dashboard that groups together all domains and all existing mailboxes, offering a clear and organized chronological view of messages handled by the server. Each row would represent a single message (incoming or outgoing), with the main information immediately visible: sender, recipient, delivery status, spam score,…
1 vote -
Allow to merge multiple email notifications into one
Allow merging multiple email notifications into one, this to avoid bombarding for example new Customers with 2 to 4 mails instead of 1.
At the moment variables like {{ Domain }} cannot be used inside the "Notification of the customer creation" mail for example
3 votesThank you for your input. We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Email all mailboxes
Add the ability to send an email to all mailboxes on a Plesk server. The ability to email all resellers/customers exists but not the ability to send a global message to all mail users.
3 votesThank you for your input!
Unfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
ZStandard-compatilibity in Webmail
Make Plesk webmail capable of reading/decompressing ZStandard-compressed mail files.
2 votesThank you for your input! We will consider this functionality in upcoming releases if it will be popular. Everyone, please continue voting for this feature if you consider it important.
—
IG -
Configure restrictions and perimissions on subscription level for SEO Toolkit
It would be very useful if an MSP can offer SEO Toolkit to their customers. At this point this is almost impossible for 2 reasons:
1. Plans of the SEO Toolkit are not designed for hosting providers and MSP, but for end users and agencies. (there are not enough resources if you have a thousand clients on one server for example).
2. There is no ability to set limitations and permissions for SEO toolkit based on the limitations of the module itself. E.g. Count of domains, urls to analyse, keywords, so now if a provider even buys the…9 votes -
Remote access to databuse using TLS
Plesk allows you to limit the remote access to MariaDB to only certain IP addresses via Databases > Database Users > Access control > Allow remote connections from. But, the connection does not use TLS. Plesk should support using a TLS connection.
1 voteSSL/TLS connections are supported since Plesk Obsidian 18.0.52, published April 25th, 2023. For details please see https://docs.plesk.com/en-US/obsidian/administrator-guide/80017/#securing-connections-to-a-remote-mysql-database-server
-- PD
-
restrict to edit SOA records for subscription, but allow to manage DNS records
It requires either limit user's ability to change the DNS zone timers (TTL, refresh, expiry...) or to limit them to a preset minimum, while still being able to edit the domain's records.
2 votesThank you for your suggestion. We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
-- KvD -
Mod Security v3.x.x (aka libmodsecurity) for NGINX and Apache
Hi,
Please consider implementing Mod Security v3.x.x (aka libmodsecurity) for NGINX and Apache in the next Plesk update.
At the moment any Plesk user if he wants to use Mod Security (official version supported by Plesk) is forced to use it as a web server:
- Apache
or
- Apache + NGINX
Any Plesk user who wants to use only NGINX as a web server and without using Apache at the moment cannot use Mod Security because Plesk does not currently support it for NGINX exclusively web servers.
Here are some of the advantages of Mod Security v3.x.x (aka libmodsecurity and these…
15 votesAlready supported in Plesk 18.0.32: https://docs.plesk.com/release-notes/obsidian/change-log/#plesk-18032
—
IG -
in mail list programs, identify which email addessess are invalid
When setting up a mailing list, the error "invalid email addresses" is useless in a list unless you identify which email address(es) have been identified as invalid
2 votesUnfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
Calculating traffic through the file manager
if I am a service provider, I must be able to control and calculating the customer's resources.
for example. I don't limit the traffic for customers. However, I would be billed for the amount that exceeds a specified value.
It's traffic included FTP + HTTP + etc.
However, Traffic does not calculate through the File manager.
File manager is very easy, simple. so, Customers be heavily used.
I think it should also be calculated .
2 votesUnfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
smarthosting
Allow a servername for "Redirect to external mail server with IP address"
2 votesUPD: Sorry, we are closing the request as no information were provided for over a month.
—
IG -
It should be possible, to get a statistic about mail sending scripts
so that you can see easily if you have a spamming script on the server
1 voteAs possible solution you can use this KB article – http://kb.odin.com/en/114845
Lets us know if it doesn’t help.
-
IG -
Add visualization "Last Login date and time" for email accounts in "Home -> Subscriptions -> domainname.tld -> mails"
Add a voice that listed last login time for email account configured in plesk panel
5 votesUnfortunately, we have to close your request, because over the years it has not become quite popular for further implementation.
—
IG -
2 votes
Closed as not explained
-
Network Drive Support for Plesk for Windows
- Using network drive for moving vhosts
- Using network drive for moving Mail Data
- Using network drive for MySQL
- Using network drive for MSSQL
- Creating backups or migrating the current backup location to a network drive
4 votesThank you for your input! We will consider this functionality in upcoming releases if it is popular. Everyone, please continue voting for this feature if you consider it important.
--
IG
- Don't see your idea?